Send a recommendation

Your e-mail:

Enter a valid email address

Receipient(s) of the email:

Enter a valid email address

Message from receipient(s):

Home > Canada (French) > Consommateurs > Produits > Puits de lumière residentiels > Accessoires > Contrôles électriques

Contrôles électriques

Gray bedroom with sun shining through blinds

Whether you simply want to control one electric venetian blind installed on a fixed skylight, or one-touch remote operation of multiple skylights and blinds, our electric control systems allow you to enjoy any number of skylights installed at any height without sacrificing convenient operation. No controls are required for the VSE or for the interior or exterior blinds-it includes a pre-installed control system pre-wired for 2 blinds and a remote control, but an additional remote or keypad is optional.

	WLC 160 power supply for electrical blinds (VS, FS) One unit powers up to three electrical blinds. For more than three blinds, use one WLC 160 unit for every three blinds. Must be connected to WLI 160 keypad.

	WLI 160 keypad (VSE, VS, FS, VCE) Remote-ready design can be programmed for unit, room or whole-house control when used in conjunction with WLR 160. Each of the three switches can operate one blind per WLC. One WLI 160 can operate several WLC 160s.

	WLR 160 remote for electrical blinds (VSE, VS, FS,VCE) Used in conjunction with the keypad WLI 160, this slimline remote uses infrared technology to operate electric blinds from anywhere in the room.

WLC 160 power supply for electrical blinds

WLF 111 sensor interface
(VSE, VCE)

The WLF 111 allows non-VELUX sensors to operate VELUX electrical skylights and accessories. The control entries of the WLF 111 are activated by a voltage of 5-40 V d.c./a.c., 20 mA. The WLF can also be connected to home automation systems.

UNIcontrol KES 160 for electrical blinds
(VS, FS, FCM)

To power one electric blind.

Send a recommendation

Contrôles électriques

Prochaines étapes

Relatif aux produits